General Structual steel DIN 17100 - EN 10025
德国标准

Grade

钢号

Treat-

ment1)

加工处理

 Chemical Composition 化学成份 % Mechanical Properties 机械性能
C P

 

 S

 

 N2)

 

Added nitrogen binding elements (e.g min 0.02% AI total)

 

Tensile Strength

抗拉强度

(transverse)

Upper Yield Stress

屈服强度

(transverse)

Elongation 伸长率 (transverse)

(Lo = 5 do)

Bending test

弯曲试验 (180o)

( transv)

Impact test 冲击功5)

ISO - V Longitudinal

Thickness 厚度 t (mm )

Thickness

厚度

 t (mm )

Thickness 厚度

 t (mm )

Thickness 厚度

 t (mm )

Thickness厚度

t (mm )

Thickness 厚度

t (mm )
£16 >16£20 >30£40 >40£63 >63£100 <3 ³ 3  £100 £16 >16£40 >40£63 >63£80 >80£100 ³3 £40 >40 £63 >63 £100 ³3 £63 >63 £100

Treated

State4)

Test

temp

温度试验

0C

 ³10 £16 >16 £63 >63 £100
( maximum 最大 ) N / mm2 N / mm2 % mandrel diameter J
St 33 - - - - - - - - - - 310 ~ 540 290 185 175 (£25) - - - 16 - - 3.5t - U, N - - - -
St 37-2 - 0.17 0.20 0.20 0.20 0.20 0.05 0.05 0.009 - 360 ~ 510 340 ~ 470 235 225 215 205 195 24 23 22 2t 2.5t U, N +20 27 - -
USt 37-2 U 0.17 0.20 0.20 0.20 0.20 0.05 0.05 0.007 - 360 ~ 510 340 ~ 470 235 225 215 205 195 24 23 22 2t 2.5t U, N +20 27 - -
RSt 37-2 R 0.17 0.17 0.17 0.20 0.20 0.05 0.05 0.009 - 360 ~ 510 340 ~ 470 235 225 215 215 215 24 23 22 1.5t 2t U, N +20 27 27 -
St 37-3 RR 0.17 0.17 0.17 0.17 0.17 0.04 0.04 - yes 360 ~ 510 240 ~ 470 235 225 215 215 215 24 23 22 1.5t 2t U ± 0 27 27 23
N - 20 27 27 23
St 44-2 R 0.21 0.21 0.21 0.22 0.22 0.05 0.05 0.009 - 430 ~ 580 410 ~ 540 275 265 255 245 235 20 19 18 3t 3.5t U, N +20 27 27 -
St 44-3 RR 0.20 0.20 0.20 0.20 0.20 0.04 0.04 - yes 430 ~ 580 410 ~ 540 275 265 255 245 235 20 19 18 3t 3.5t U ± 0 27 27 23
N - 20 27 27 23
St 50-2 R - - - - - 0.05 0.05 0.009 - 490 ~ 660 470 ~ 610 295 285 275 265 255 18 17 16 - - U, N - - - -
St 52-3 RR 0.20 0.20 0.22 0.22 0.22 0.04 0.04 - yes 510 ~ 680 490 ~ 630 355 345 335 325 315 20 19 18 3t 3.5t U ± 0 27 27 23
N - 20 27 27 23
St 60-2 R - - - - - 0.05 0.05 0.009 - 590 ~ 770 570 ~ 710 335 325 215 305 295 14 13 12 - - U, N - - - -
St 70-2 R - - - - - 0.05 0.05 0.009 - 690 ~ 900 670 ~ 830 365 355 345 335 325 10 9 8 - - U, N - - - -

Notes:    1), 2), 3), 4), 5) references shall be made to DIN 17100 Handbook.